Integration
https://xml.smstec.ru/api/v1/easysms/[connect_id]/send_sms
Options:
connect_id - connection identifier
login - login to Easy-sms platform
password - password in the Easy-sms
text - message text in urlencode format
originator - the name of the sender
phone - subscriber's number in the format 7ХХХХХХХХХХ
If the request is successful, the id of the sent message will be received in response. If the message consists of more than 1 part, the id of the last part of the message, to which the long message was broken, is returned in response.
It is necessary to agree in advance the IP address, from which the dispatch will be made, with our manager.
system_id: XXXXXX
password: XXXXXX
ip: XXXXXX
port: XXXXXX
interface_version=0x34
source_addr_ton=0x00
source_addr_npi=0x00
dest_addr_ton=0x00
dest_addr_npi=0x00
enquire_link_interval=60
system_type=WWW
Values of system_id, password, ip, port must be obtained from the manager It is necessary to agree in advance the IP address, from which the dispatch will be made, with our manager.
API-Viber
To send messages to the subscriber, the partner must send a POST request to the server of the "Easy-sms" handler. For sending over the HTTPs protocol - https://msender.easy-sms.ru/numbers/get-package.
To send only text to Viber, You need to specify the following parameters: x_auth_user, x_auth_pass, messenger, sender, text, phones [number].
To send text + picture + button You need to send additional parameters: image_source, btn_text, btn_link
To send the same image to different subscribers, You can use the tag and the image ID, sent to the partner the first time the message was sent. After that, it is necessary to send xml, where instead of the tag ... use the tag 409fe2dfc2337245936e3e10a9744b74aeea817cdfbd34eab35ab3ddad38986d
